Log eines kompletten Bootvorganges mit eingesteckter CF Card:
Intel(R) Consumer Electronics Firmware Development Kit (Intel(R) CEFDK)
Version 1.0.5 (01/20/06 14:26:00).
Copyright (C) 1999-2005 Intel Corporation. All rights reserved.
Video_init_pal starting
scart_status = 0xE0
Video information from Video_debug_info
**********************************************
Model: 5 IP1100G
VGA: disable
Mode: 1 PAL
Video memory base: 0xF0000000
Video memory size: 0x800000
aperture size: 0x8000000
Display base: 0x0
Display size: 0x240000
Display Physical Base: 0xF0000000
Display Width = 720
Display Height = 576
Display Bits Per Pixel = 32
Display Pitch = 4096
System Configuration = 0x21
Found 40MB heap at 05000000 (80MB).
Version Information
core : 5
cs_854 : 5
brd_sunsetvalley : 5
Board Revision : 15
Attempting to boot Microsoft(R) Windows(R) CE...
Time stored is 09:00:00 on 08-01-04
POST returned with 0
B0
B1-
B1
B2
B3
ToMain
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Jul 6 2006 10:11:48
ROM Loader Version 1.6 (Built Jul 6 2006 10:11:38)
Returned device id:3ed817
Returned device id:3ed8173941IP110
FindAllPCINetCard: Searching for PCI Ethernet NIC ...
FindALLPCINetCard(0): Found Ethernet NIC (IRQ=12, IOBase=0xFEAFF000, Type=16).
SelectPCINetCard:Argument IOBASE=0, IRQ=0,TYPE=2
SelectPCINetCard:Found 1 PCI Ethernet NIC ([0] @ 9000) ...
SelectPCINetCard: Found our winner IO 9000 Irq C Type 10
SelectPCINetCard: Found Ethernet NIC (IRQ=12, IOBase=0x9000).
bFoundCard 9000 C 16
I825xxInitDMABuffer: Start.
I825xxInitDMABuffer: End.
calling pfnEDbgInit(9000,1,30E04
I825xxInit: Start.
eth825xx_init: Baseaddress = 9000.
nicInit link speed (100Mb).
I825xxInit: End.
calling pfnEDbgCurrentPacketFilter(32) (promiscuous).
I825xxCurrentPacketFilter: Start.
I825xxCurrentPacketFilter: dwFilter = 20.
I825xxCurrentPacketFilter: End.
BTLDR - FPA PIC Powered Up.
BTLDR - IRR PIC Software Version (CUR): 00000001.00000009
File System initialized.
Compact Flash initialized.
CheckIDE rc = 1.
Image file found.
System ready!
Preparing for download...
Opened file NK.bin.
##################################################
rom_offset=0x80000000.
Found pTOC signature.
ROMHDR at Address 00220044h
RomHdr.ulRAMStart=811D4000h
RomHdr.physfirst=80220000h.
Debug Serial Init
SysInit: GDTBase=811d40e8 IDTBase=811f5860 KData=811fd800
Windows CE Kernel for i486 Built on Jun 24 2004 at 18:23:42
g_pPageDir = 81200000
X86Init done, OEMAddressTable = 80223f98.
**** Thomson SNMP Extension Attached ****
FANCTL - FanCtl version 1.1 Jul 20 2006 14:47:10
FANCTL - Set Top Box Model is IP11xx (Mamba).
FANCTL - Configuration bits read as 0x5
FANCTL - Platform reporting as FANLESS
FANCTL - Signaled Launch # 53 to OS.
MAMBA - FPA: Clear SMB Bus
MAMBA - FPA: Placed in Run Mode...
MAMBA - Unmuting the audio.
MAMBA - AC97: Found registry entry for template
MAMBA - AC97: ERROR looking for audio instance [1814], forcing default value.
MAMBA - AC97: Device instance [Drivers\BuiltIn\PCI\Instance\ICHAC971].
MAMBA - AC97: Access to device available through 0xa100
MAMBA - AC97: IO base address is 0xa100
MAMBA - AC97: SPDIF value is 0x404 AFTER update
MAMBA - IGDCTRL: Enumerating all display devices
Device = 0
Display = Primary, Vga compatible [No]
Enum Device String =
Enum Device Name = ddi_iceg.dll
MAMBA - PAL format set in registry, updating encoder.
MAMBA - Platform detected as Standard Def without HDMI
MAMBA - IRR: Ver: 0x0109, dID: 0x0F90, Cfg: 0x2184, bGp: 0x2000, OSC: 0x344C
MAMBA - IRR: SW version recorded as 1.09, 109
MAMBA - FPA: SW version recorded as 6.03, 603
igdctrl: Requesting number of attributes
igdctrl: retval from IGDCTRL = 1
igdctrl: number of attributes = 50
igdctrl: Found attribute id 3
igdctrl: Attribute type=PD_ATTR_TYPE_RANGE
igdctrl: Requesting number of attributes
igdctrl: retval from IGDCTRL = 1
igdctrl: number of attributes = 50
igdctrl: Found attribute id 3
igdctrl: Attribute type=PD_ATTR_TYPE_RANGE
ConfigRestore:enter
restore iCnt(0) m_key()
tcea_RebindAdapter : card=1 - mode=0 - ip=0.0.0.0 - subnet=0.0.0.0 - gw=0.0.0.0 - dns=0.0.0.0
tcea_RebindAdapter1
tcea_RebindAdapter2
tcea_RebindAdapter3
tcea_RebindAdapter4
tcea_RebindAdapter5
tcea_RebindAdapter : card=2 - mode=0 - ip=0.0.0.0 - subnet=0.0.0.0 - gw=0.0.0.0 - dns=0.0.0.0
tcea_RebindAdapter1
tcea_RebindAdapter2
tcea_RebindAdapter3
tcea_RebindAdapter4
tcea_RebindAdapter5
ConfigRestore:end
ConnectAP:enter
tcea_set_SSID0 : szSsidToConnect= && szAuthMode=0 && szEncrlevel=0 && szKey= && keyindex=1 && szOpmode=0
tcea_set_SSID1
ConnectAP:0
ConnectAP:end
- ConnectAP failed 0 bRet(0)
MAMBA - Wifi Setup failed -4
MAMBA - Signaled Launch # 55 to OS.
NETLINKMON - Name: PCI\E100CE51
NETLINKMON - IP Address: 0.0.0.0
NETLINKMON - Type: Ethernet
NETLINKMON - DHCP: Enabled
NETLINKMON - DHCP Server: 192.168.1.254
NETLINKMON - Lease: 1091343631
NETLINKMON - Duration: 864000 seconds
NETLINKMON - Bound: No
NETLINKMON - Connected: No
**** Thomson SNMP Extension Attached ****
MAMBA - FPA: Hardware Version = V2.0
NETLINKMON - Name: PCI\E100CE51
NETLINKMON - IP Address: 192.168.1.xxx
NETLINKMON - Type: Ethernet
NETLINKMON - DHCP: Enabled
NETLINKMON - DHCP Server: 192.168.1.254
NETLINKMON - Lease: 1091343637
NETLINKMON - Duration: 864000 seconds
NETLINKMON - Bound: Yes
NETLINKMON - Connected: Yes
NETLINKMON - NIC: Network Link Monitor - Activated
NETLINKMON - Adapters: 1, Connections: 1
FLEXLOADER - ROM: C/F Version = 0x2803 - EEPROM
FLEXLOADER - OPS: C/F Version = 0x3804 - EEPROM
FLEXLOADER - APP: C/F Version = 0x4802 - EEPROM
FLEXLOADER - CFG: File Exists - 1.
FLEXLOADER - Download Protocol: HTTP
FLEXLOADER - HTTP:
Get(https://stbupdate.streamingmxd.de/getbootcfg.asp?HW=01.01&Model=IP1101PC&Rom=28.03&IRPic=01.09&FPAPic=06.03&OS=38.04&App=48.02&Mac=xx:xx:xx:xx:xx:xx&SN=xxxxxxxxxxxxxx&ATime=2006-xx-xx00:08) -
RC: 0, Sts: 0, HTTP: 1, Retries: 5, Size: 138
SNMP - TRP: Idx: 25, OID: 10406 "https://stbupdate.streamingmxd.de --> getbootcfg.asp"
FLEXLOADER - CFG: getbootcfg.asp download succeeded.
FLEXLOADER - ROM: Network File = "fwh.bin" - Configuration File
FLEXLOADER - ROM: C/Flash File = "\hard disk\fwh.bin"
FLEXLOADER - OPS: Network Name = "NK.bin" - Configuration File
FLEXLOADER - OPS: C/Flash Name = "\hard disk\NK.bin"
FLEXLOADER - APP: Network Name = "PKFClient.exe" - Configuration File
FLEXLOADER - APP: C/Flash Name = "\hard disk\PKFClient.exe"
FLEXLOADER - ROM: NET Version = 0x2803 - Configuration File
FLEXLOADER - OPS: NET Version = 0x3804 - Configuration File
FLEXLOADER - APP: NET Version = 0x4802 - Configuration File
SNMP - TRP: Idx: 9, OID: 3401 ""
**** Thomson SNMP Extension Detached ****
**** Thomson SNMP Extension Attached ****
FLEXLOADER - CFG: Requested SNMP Reset.
FLEXLOADER - CFG: Reset Completed.
FLEXLOADER - ROM: C/F Version Running
FLEXLOADER - OPS: C/F Version Running
igdctrl: Requesting number of attributes
igdctrl: retval from IGDCTRL = 1
igdctrl: number of attributes = 50
igdctrl: Found attribute id 3
igdctrl: Attribute type=PD_ATTR_TYPE_RANGE
igdctrl: Requesting number of attributes
igdctrl: retval from IGDCTRL = 1
igdctrl: number of attributes = 50
igdctrl: Found attribute id 3
igdctrl: Attribute type=PD_ATTR_TYPE_RANGE
igdctrl: Requesting number of attributes
igdctrl: retval from IGDCTRL = 1
igdctrl: number of attributes = 50
igdctrl: Found attribute id 13
igdctrl: Attribute type=PD_ATTR_TYPE_BOOL
MemberRestore:enter
restore iCnt(0) m_key()
MemberRestore:end
DoNTPSync:enter
FLEXLOADER - APP: C/F Version Running
FLEXLOADER - Normal Program Termination
**** Thomson SNMP Extension Detached ****
DoNTPSync:end
Zurück zu: IP1101
